Wacker Neuson DV90 This unique 9-ton payload dumper allows the entire operator's console to swivel 180 degrees providing excellent visibility regardless of the working direction or payload size. The 180° swivel console allows the operator to select the optimal line of sight for any task Easy to operate

Wacker Neuson ST31 Offers 3,100lbs (1,406kg) of rated operating capacity at 50% with a lift height over 125in (3,175mm) Top speed of nearly 10mph (16kph) to reduce travel time Spacious extended cab maximizes room and comfort for operator Service access from forward tilting cab and specially designed arrangement of internal components for quick and easy maintenance Class leadi […]

Wacker Neuson ST45 Expansive Maintenance Access Controls for Every Operator Maintenance and Filter Free After-treatment

Wacker Neuson EZ50 Flexible cylinder rod protection 3-point kinematics Active Working Signal (AWS) Load Sensing Flow Sharing Zero Tail Standard Components General Rubber track: 400 mm Dozer blade LED work light mounted on lifting arm AWS (Active Working Signal) on the engine hood (red LED strips that signal the machine’s readiness to work) Toolkit, including greas […]

BANDIT 2680XP BEAST RECYCLER–STUMP GRINDERS TRACK THE BEAST® HORIZONTAL GRINDER The Beast® Model 2680XP track features the same cuttermill as the 3680XP track but comes in a more compact size and lighter weight weighing around 68,000 pounds. The 2680XP track is equipped with a Caterpillar C18, 755 horsepower engine, 42” diameter by 63” wide cuttermill, and a 35" high x 60" wide mill op […]

*LOW HOUR 2022 Bandit 90XP with Integrated Chipper Box* Hours: 71.5 84HP, 2.5L Gas Engine  A Bandit 90XP chipper with an integrated chip dump box is a specialized combination unit. The 9-inch capacity disc chipper is mounted on a 360-degree rotating turntable over an 8.5 cubic yard hydraulic dump box on a single frame, eliminating the need for a separate tow vehicle or chip truck. […]

Brand new, unused Isuzu 6HK1 industrial diesel engine. This is not rebuilt or remanufactured. Engine identification: Manufacturer: Isuzu Motors Ltd. • Engine model: 6HK1 • Engine specification/type: GH-6HK1XKSA-01 • Engine number/serial number: 969099 • Additional plate codes: 7A9 and BB/CB • Displacement: 7.8 litres • Configuration: Six-cylinder, turbocharged diesel • Co […]

Brand new 300x52.5x82 rubber tracks with an aggressive tread pattern for strong traction and reliable performance. Size: 300x52.5x82 300 mm width 52.5 mm pitch Brand new / unused Heavy duty rubber construction Aggressive tread pattern Sold as pictured $2000 for the set

NEW BUCKET TEETH & RIPPER TEETH – VARIOUS SIZES & STYLES Large selection of new bucket teeth, ripper teeth and related ground-engaging parts available. We have multiple sizes, styles and part numbers in stock for excavators, loaders and other heavy equipment. Bucket teeth Ripper teeth Various sizes and profiles Multiple part numbers available New / unused Indivi […]

We have 4 Wacker Neuson LTV4 light towers available, each with approximately 38 hours. These are exceptionally clean, low-hour units that are ready to go straight to work. Perfect for construction sites, road work, utilities, oil & gas, events, and emergency lighting. The 23 ft vertical mast rotates 360° for excellent light coverage while the efficient LED lighting and diesel engine […]

Brand new Costex Aftermartet 9V-0205 cylinder repair kit (3 available). Includes seals and hardware for applicable Caterpillar equipment. Part Number: 9V-0205 Brand: CTP / Costex Tractor Parts Description: Cylinder Kit / Seals / Hardware Brand new / unused New in original packaging 3 available Sold individually or together Aftermarket replacement for Caterpillar applic […]

Brand new 400x86Bx52 rubber tracks with a heavy-duty tread pattern designed for strong traction, stability and dependable performance. Size: 400x86Bx52 400 mm track width 86 mm pitch Brand new / unused Heavy-duty rubber construction Aggressive tread pattern Suitable for a variety of compact construction equipment Sold as pictured $2200 for the set

Brand new heavy-duty rubber tracks with aggressive zigzag tread pattern for excellent traction and stability in a variety of working conditions. Size: 320x86x50 320 mm track width 86 mm pitch Zigzag tread pattern Heavy duty construction Great traction on dirt, gravel, mud and uneven terrain New/unused $2000 for the set

Brand new Hitachi ECU / electronic controller, part number 9260558. Part Number: 9260558 Hitachi controller / ECU Brand new / unused Electronic control module for heavy equipment Sold as pictured Please verify part number and machine compatibility before purchasing Great replacement option for equipment requiring Hitachi P/N 9260558.

Used Camso rubber tracks, size 320x86x52, removed from a machine and available as take-offs. Details: Size: 320x86x52 Camso brand Used take offs Good remaining tread Normal cosmetic wear from use Sold as pictured Great option if you need a replacement set without paying new track pricing $2000 for the set

Brand new CTP (COSTEX) 333-0960 wear strip for select Caterpillar motor grader applications. 12 available. Part Number: 333-0960 Brand: CTP / Costex Tractor Parts Description: Wear Strip Material: Heat-stabilized nylon Color: Black Length: 320 mm Width: 39 mm Height: 46 mm Brand new / unused New in original packaging Designed as a molded plastic wear strip for the […]

Brand new genuine John Deere shims part number T129981, still in original packaging. Part Number: T129981 Brand: John Deere Genuine OEM John Deere Brand new / unused Multiple available Original packaging Sold individually or in quantity Ideal for equipment repair, maintenance or replacement stock

New 80 series ripper. Designed to fit CAT wedge coupler.

Take off volvo 250/300 12 foot arm.

325G Skid with dirt bucket. Machine has 2954 hours. Runs and functions well. New rear hood match installed.